|
Home
|
Back
BASIC PIANO REPAIR COURSE TOOLS From PIANOPHILE
Subject to change without notice.
This list shows the tools you will need for the Basic Piano Repair course that are supplied by PIANOPHILE in Brossard, Qc.
If you are taking the course, look at the list and email me the tools you already have. Otherwise, I will bring you a complete set to purchase on the first day of classes.
BE SURE TO INFORM ME EARLY IF YOU WOULD LIKE TO PURCHASE THE OPTIONAL SET AS WELL. Otherwise, I willonly bring the basic set. The optional set makes repetative repairs, like those needed for rebuilding or reconditioning, easier. The basic set is good for single repairs.
|
PART #
|
ACTION REGULATING TOOLS
|
|
|
1130
|
Combination Handle - Black Plastic
|
|
|
1139
|
Let Off Screwdriver
|
|
|
1173
|
Pointy Capstan Regulator
|
|
|
1170
|
Capstan Wrench 8"
|
|
|
1335
|
Long Tweezers
|
|
|
|
KEY REGULATION TOOLS
|
|
|
1236
|
Key dip block
|
|
|
|
|
|
DAMPER REGULATION TOOLS
|
|
|
1142
|
Wire Bender - angled, for combo handle
|
|
|
1159
|
Spoon Bender - for combo handle
|
|
|
|
GRAND REGULATION TOOLS
|
|
|
1090
|
Spring regulator
|
|
|
1151
|
Drop regulator
|
|
|
|
REPAIR TOOLS - STRINGS
|
|
|
1005*
|
Tuning Hammer
|
|
|
1316
|
Coil Lifter
|
|
|
|
HAMMER REPAIR TOOLS
|
|
|
1390
|
Screwdriver, long, thin, holds screws
|
|
|
|
CENTER PINNING TOOLS
|
|
|
1255
|
Center pin punch
|
|
|
1418
|
Reamer
|
|
|
|
PINBLOCK REPAIR TOOLS
|
|
|
1321
|
Tuning pin punch
|
|
Approximate Total:
all required tools
|
$380 (July 2011)
|
|
|
|
|
|
|
|
OPTIONAL REPAIR TOOLS
The above tools should be sufficient for one or two repairs of each type, but if you foresee doing many repitions of a repair, for example if you are planning to recondition a piano by replacing all the hammers, etc, then these tools will make those types of jobs easier.
|
|
|
1365
|
Hammer head extractor
|
|
|
1040
|
For hammering in many tuning pins (You will not get 1321 as well)
|
|
|
1136
|
Makes aligning hammers easier
|
|
|
1340
|
Makes voicing easier
|
|
|
1346
|
Needles for 1340
|
|
|
1296
|
Wire Benders
|
|
|
1110
|
Hammer shank reducer
|
|
Approximate Total:
all optional tools
|
$268 (July 2011)
|
|
Prices are approximate and subject to change without notice.
Prices do not include taxes or shipping
* - The tuning hammer is also required for the tuning course and is duplicated in this list.
|